Usage and precautions of water abrasive paper

The use of 1. water sandpaper 1. Use grinding in direct water discharge When grinding relatively small items, you can directly put the items in the water, and water them while grinding, so that the items will be cleaned every time grinding, and the work efficiency is faster. 2, slowly add water to use When the ground items are relatively large, especially when it is not convenient to put them in water for grinding, use sandpaper with larger sandpaper particles to roughly grind them, then use water sandpaper to dip them in water for fine grinding, and slowly add water to use when the water is gone.

2. water sandpaper use matters needing attention 1. Water sandpaper needs to be polished with water and cannot be dry-ground. Direct dry-grinding will cause the debris of the polished material to adhere to the gap of the sand particles of the water sandpaper, resulting in the weakening of the friction and grinding force of the water sandpaper, which will not only affect the polishing effect, but also cause the water sandpaper to be more easily damaged and the durability to become low. 2. Water sanding paper is divided into different types. When grinding, coarse sandpaper with smaller types should be used first, and large water sanding paper should be added slowly to polish and polish again and again. 3. Be patient when polishing, because the same place needs to be polished dozens of times back and forth. Every time you finish polishing, you need to change the model of water sanded paper. Before changing, you must brush the place you just polished with clean water.

BRIEF INTRODUCTION

Henan Yuteng Grinding Material Co., Ltd. is located in Kaifeng City, Henan Province. Is a set of production, research and development, service as one of the grinding agent, grinding, polishing products professional company, specializing in the production and sales of coated grinding tools derived ancillary products: flocking sand disc, blade, all kinds of special-shaped grinding disc, sponge grinding block, steel paper disk, ring sand belt, sand ring and automotive polishing products.

Our main products are velcro disc,Abrasive Paper,Fiber Disc,Flap Disc,Abrasive Cloth,Abrasive Belt.

Relying on the advantages of the industrial base, the company has advanced production equipment and strong technical force, complete testing equipment to ensure that the products are sharp, wear-resistant and high strength, and the product quality reaches the advanced level of similar international products.

Our products can be used for all kinds of metal watches and stainless steel, alloy steel, non-alloy steel, non-ferrous metals, titanium alloy and other grinding and wire drawing, polishing and so on; Wood, high-medium fiberboard, flower board, composite board, glass, rubber and other table grinding and polishing. Widely used in automobile, steel, building materials, shipping, aviation, wood, plastic , leather and other industries.

We provide customers with the best surface treatment program, according to the actual needs of customers "tailored" a variety of specifications of sand pan, sand belt, sand carbon and emery cloth ring polishing products.

The company's flexible operating mechanism and all customer-centric concept, we in addition to provide you standardized, serialized products, but also according to your special requirements, for you to manufacture high-quality, personalized non-standard coated with abrasive products.

If you have any product requirements, you can contact us

E-Mail: greatabrasives01@126.com