Home> News> Discussion on the use of the Flap Discs
July 24, 2023

Discussion on the use of the Flap Discs

Discussion on the use of the Flap Discs

With the rapid development of the abrasive industry, there are many kinds of abrasive tools, but the widely used abrasive tool is the blade.
The louver is a large variety of coated abrasive conversion products. It is made by sticking the cut coated abrasive sheets one by one along the circumference with adhesive on the back cover plate. It is a required product in industrial production. It is mainly installed on hand-held power tools for polishing welds, burrs, chamfers, surface rust removal, surface polishing, etc. of various metal and non-metal parts. Compared with the resin grinding wheel of the fixed abrasive tool, the grinding and polishing are completed at one time.
The Flap Discs effectively shortens the operation time, saves the grinding cost, improves the grinding efficiency, the abrasive has strong self-sharpening and high utilization rate, the air cooling does not damage the surface, the surface quality is easy to control and the cost performance is high, the operator fatigue is reduced, and the machine life is increased. It is widely used in various industries or fields of the manufacturing industry.
The Flap Discs can also replace the resin needle grinding wheel, which has high elasticity, good self-sharpening, high grinding rate and low noise. It is suitable for grinding the burrs of welds and stamping parts in the box body, and is used for grinding and polishing various stainless steel and carbon steel structural parts. The new design enables the substrate to be completely separated from the sand disc, is convenient for manual decoration, and is very environmentally friendly.

BRIEF INTRODUCTION

Henan Yuteng Grinding Material Co., Ltd. is located in Kaifeng City, Henan Province. Is a set of production, research and development, service as one of the grinding agent, grinding, polishing products professional company, specializing in the production and sales of coated grinding tools derived ancillary products: flocking sand disc, blade, all kinds of special-shaped grinding disc, sponge grinding block, steel paper disk, ring sand belt, sand ring and automotive polishing products.

Our main products are velcro disc,Abrasive Paper,Fiber Disc,Flap Disc,Abrasive Cloth,Abrasive Belt.

Relying on the advantages of the industrial base, the company has advanced production equipment and strong technical force, complete testing equipment to ensure that the products are sharp, wear-resistant and high strength, and the product quality reaches the advanced level of similar international products.

Our products can be used for all kinds of metal watches and stainless steel, alloy steel, non-alloy steel, non-ferrous metals, titanium alloy and other grinding and wire drawing, polishing and so on; Wood, high-medium fiberboard, flower board, composite board, glass, rubber and other table grinding and polishing. Widely used in automobile, steel, building materials, shipping, aviation, wood, plastic , leather and other industries.

We provide customers with the best surface treatment program, according to the actual needs of customers "tailored" a variety of specifications of sand pan, sand belt, sand carbon and emery cloth ring polishing products.

The company's flexible operating mechanism and all customer-centric concept, we in addition to provide you standardized, serialized products, but also according to your special requirements, for you to manufacture high-quality, personalized non-standard coated with abrasive products.

If you have any product requirements, you can contact us

E-Mail: greatabrasives01@126.com

Flap Disc

Share to:

LET'S GET IN TOUCH

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send